2.5G High-Power PoE+ Injector

Next-gen 2.5 Gbps PoE Injector - Supports 10/100/1000/2500 Mbps and Power over Ethernet 802.3atThe 2.5G Ethernet PoE+ Injector from Intellinet Network

POE-171A-95 - 802.3bt Ultra PoE Injector - PLANET Technology

Linksys - LAPPI30W - 30W 802.3at Gigabit PoE+ Injector Taa Compliant

30W PoE+ 802.3af/at standard Simple installation for IEEE 802.3at compatible wireless LAN Aps, IP video cameras or IP Phones

Zyxel Single Port Powerinjector | 1-2.5G MultiGig 802.3at PoE+ Injector | Simple Plug and Play | IEEE 802.3af/at

POE, Injector, 2.5, Gigabit, 48V, Output, 60W, .625A

The 2.5G Ethernet PoE+ Injector from Intellinet Network Solutions passes both data and electrical power to a PoE-compatible device via standard Cat5e or Cat6 network cable. Equipped with one multi-gigabit Ethernet PoE+ copper output port, this injector can power an IP camera, a wireless LAN bridge and more while delivering ultra-fast network speeds up to 2500 Mbps, even if your network switch doesn't support PoE.

Intellinet 2.5g High-Power PoE+ Injector, One 30 W Port, IEEE 802.3at/af Compliant, 10/100/1000/2500 Mbps, Plastic Housing, Wall-Mount Option 561570

4-Port Multi-Gigabit PoE+/PoE++ Injector - Ethernet Extenders

TRENDnet 2.5G PoE+ Injector, TPE-215GI, PoE (15.4W) or PoE+ (30W

The 2.5G Ethernet PoE+ Injector from Intellinet Network Solutions passes both data and electrical power to a PoE-compatible device via standard Cat5e or Cat6 network cable. Equipped with one multi-gigabit Ethernet PoE+ copper output port, this injector can power an IP camera, a wireless LAN bridge and more while delivering ultra-fast network speeds up to 2500 Mbps, even if your network switch doesn't support PoE.

Intellinet 2.5g High-Power PoE+ Injector, One 30 W Port, IEEE 802.3at/af Compliant, 10/100/1000/2500 Mbps, Plastic Housing, Wall-Mount Option 561570

TRENDnet's 95W 2-Port Industrial 2.5G PoE++ Injector, model TI-IG290, allows users to add PoE++ power to a non-PoE 2.5G switch. Connect the 2-port industrial 2.5G PoE++ injector to a non-PoE 2.5G switch, and then run Ethernet cables up to 100 meters (328 ft.) to network two PoE/PoE++ devices. This multi-port industrial 2.5G PoE++ injector supplies up to 95W of power to two PoE devices with a total PoE budget of 180W.

TRENDnet - TI-IG290 - 95W 2-Port Industrial 2.5g PoE++ Injector

Procet 2.5/5.0GbE 30W PoE+ Injector (802.3af/at, NA/EU) - LUCID

The Fastcabling 30W 802.3at PoE+ Midspan Injector can add power to the Ethernet cable and transmit data to front-end IP devices so that the PoE system can be set up. Both power and data are running over a signal Ethernet cable which makes the installation convenient and cost-saving. There is no need to buy an expensive PoE switch or install electrical wiring and outlets in hard-to-reach locations.

30W PoE+ Midspan Injector 10G/5G/2.5G/1G, 55V, 100-240VAC, for IEEE 802.11ax PoE APS, WiFi 6, Plug & Play, Wall/Desktop Mount, 1 Port, Upgrade Non-PoE