9 x 16 1-1/2 HP Metal-Cutting Bandsaw - Grizzly Industrial

The G0811 9 x 16 1-1/2 HP Metal-Cutting Bandsaw can handle anything you throw at it thanks to the 114-1/2 blade and the quick-release vise on the 6-1/2 x 31 table. It has maximum cutting capacities of 9 round stock and 5 x 16 rectangular stock (at 90°). The speed at which the saw blade will cut through a workpiece is controlled by blade type, feed rate, and feed pressure.

Grizzly G0811 9 x 16 1-1/2 HP Metal-Cutting Bandsaw

Grizzly G0803Z – 9″ Benchtop Bandsaw with Laser Guide – CT Power Tools

Grizzly Industrial 9 x 16 1-1/2 HP Metal-Cutting Bandsaw

Grizzly G0811 9 x 16 1-1/2 HP Metal-Cutting Bandsaw

Grizzly G0513X2 17 2 HP Bandsaw w/ Cast-Iron Trunnion

Grizzly G0803Z – 9″ Benchtop Bandsaw with Laser Guide – CT Power Tools

South Bend 9 x 12 2 HP Metal-Cutting Bandsaw - US Tool Depot

Grizzly Industrial G0513-17 2 HP Bandsaw - Power Band Saws

Cut round and rectangular metal workpieces at blade speeds between 85 and 195 FPM (Feet Per Minute). Speed adjustments are as simple as rotating the blade speed dial until the speed display shows the speed desired. The vise consists of a movable jaw and fixed jaw and can hold material up to 6 in. deep and be set to cut angles from 0° to 45°. The portable platform with built-in wheels and retractable handle make it ideal for storing away or moving to where ever the job requires.

Grizzly G0926 - 4 x 5-1/2 Variable-Speed Metal-Cutting Bandsaw

Metalworking shops should own this bandsaw. The full-featured G0592 10 x 18 2 HP Metal Cutting Bandsaw includes a large cutting capacity. The swivel base cuts miters from 60 degrees to the left to 45 degrees to the right. The G0592 has VS blade control ranging from 98 to 394 feet per minute. Simply rotate the speed adjustment knob to dial in your speed. The speed at which the blade will cut through a workpiece is controlled by blade type, feed rate, and feed pressure.

Grizzly Industrial 10in. x 18in. Metal-Cutting Bandsaw, G0592

The G0561 7 x 12 1 HP Metal-Cutting Bandsaw was designed to cut 7 round and 7 X 12 rectangular metal stock. It can cut in either horizontal or vertical positions.The 93 x 3/4 blade rotates at one of the four blade speeds (90, 135, 195, and 255 FPM). Blade speed adjustments are as easy as moving the location of the V-belt on the motor and wheel pulleys.The feed rate and feed pressure are also adjustable.