GR-WM4-ENC 24V DC 37rpm Worm Gear Motor with Encoder – Gimson Robotics

The GR-WM4-ENC is a robust 24V DC nominal motor and gearbox combination providing a low speed high-torque output. The single stage all-metal worm-and-wheel transmission is designed to be self-locking, in most cases holding position after power has been removed, while also producing little noise when in motion. The ou
The GR-WM4-ENC is a robust 24V DC nominal motor and gearbox combination providing a low speed high-torque output. The single stage all-metal worm-and-wheel transmission is designed to be self-locking, in most cases holding position after power has been removed, while also producing little noise when in motion. The output offers a no-load speed of 37rpm, and speed of 28rpm when under a 91.8kg-cm rated load, making it suitable for many automation projects (maximum 40% duty at the rated load). A 12PPR quadrature encoder on the motor allows the output to be tracked accurately (720 pulses per revolution of the output shaft), enabling precise speed or position control and for multiple motors to be synchronised with an appropriate controller.

15KgCm Dc Worm Gear Motor 24v , 60g Worm Gear Motor With Encoder

High Torque Gearmotor Self-Locking Worm Gear Motor w/ Encoder - 24V, 56RPM - RobotShop

37mm DC Metal Geared Motors with Encoder

37mm DC Metal Geared Motors with Encoder

4 Pole 2 57mm 24V 2500rpm Brushless Dc Electric Motor With Worm Gear Reducer

The 6mm output shaft is more stable, has the characteristics of high hardness, good thermal conductivity and anti friction. The reduction motor is

Gear Reduction Motor, DC 24V Full Metal Worm Gear Motor, High Torque Reduction Motor with Encoder Self Locking, 6mm Output Shaft (10RPM)

15KgCm Dc Worm Gear Motor 24v , 60g Worm Gear Motor With Encoder

GR-WM4-ENC 24V DC 37rpm Worm Gear Motor with Encoder – Gimson Robotics

✔Rated Voltage: AC 110V; No-load Speed: 12 RPM; Rated Torque: 800KG.CM/695lb.in; Rated Power: 180W; Reduction Ratio: 1/100; Shaft Bore Diameter: 18mm;