802.3at PoE Injector

The POE-AT1 is single port 802.3at PoE injector capable of powering power over Ethernet devices up to 30 Watts over Cat-5 cable.

GAT-8 IEEE 802.3at Active Gigabit PoE+ Injector Power Over Ethernet In – poe -world

Use 12-60 Volt DC Power to Deliver 50 Volt IEEE 802.3at PoE+ Use the GAT-50v30w with any unregulated DC power source from 12 volts up to 60 volts to deliver a regulated 50-volt Active PoE+ up to 30 watts of power for WiFi - Cameras - or PoE Devices.

DC Powered PoE+ Gigabit Inline Injector That Converts 12-60V Volts to 50 Volt IEEE 802.3at PoE+

Planet PoE-164 30W High Power PoE+ Ethernet Injector

Aruba Instant On 802.3at POE Injector

Use this PoE injector to upgrade your PoE network with the flexibility and features of IEEE 802.3bt (60 watts of power per line) for higher power devices, without the expense and hassle of installing a new PoE switch. Get IEEE 802.3bt Type 3 power at a fraction of the cost. Dual Signature Active PoE means security and provides a 55 volt, 60 watt output. Power over Ethernet injector delivers 4-pair PoE++ with active negotiation to prevent accidental overpowering.

PoE Texas Gigabit IEEE 802.3bt (PoE++) Dual Signature Injector with 55 Volt 60 Watt Output (6KV Surge Protection)

Veracity 802.3at Gigabit POE Injector, 30w output (VOR-OS-30-US)

This 4-Port Multi-Gigabit PoE++ Injector Hub serves as Power Sourcing Equipment (PSE) and enables multigigabit speeds of 5Gbps, 2.5Gbps, 1Gbps,

4-Port Multi-Gigabit PoE++ Injector, 5/2.5/1G Ethernet (NBASE-T), PoE/PoE+/PoE++ (802.3af/802.3at/802.3bt), 160Watts Power Budget, Wall/DIN Rail

The Edimax GP-101IT is a Power over Ethernet injector that not only delivers a cost-effective solution for power distribution, but also provides a seamless way of deployment on the existing LAN infrastructure. With the use of power injectors, DC power of up to 30W and the data that comes from a non-PoE switch or router are merged together and then transmitted to the IEEE 802.3at/af compliant products such as PoE dome cameras through the Ethernet cabling.

Edimax GP-101IT IEEE 802.3at Gigabit PoE+ Injector

The Fastcabling 30W 802.3at PoE+ Midspan Injector can add power to the Ethernet cable and transmit data to front-end IP devices so that the PoE system can be set up. Both power and data are running over a signal Ethernet cable which makes the installation convenient and cost-saving. There is no need to buy an expensive PoE switch or install electrical wiring and outlets in hard-to-reach locations.

30W PoE+ Midspan Injector 10G/5G/2.5G/1G, 55V, 100-240VAC, for IEEE 802.11ax PoE APS, WiFi 6, Plug & Play, Wall/Desktop Mount, 1 Port, Upgrade Non-PoE

Ideal for Powered Devices that Consume High Power Planet IPOE-165 Industrial IP67-rated Single-port 802.3at PoE Plus Injector provides a maximum of up to 30 watts for each PoE output port - transmitting both the Gigabit Ethernet data and 802.3at PoE power over the UTP cable.