Bilgenpumpe, 12V

Reliable switch activation. Replaceable cartridge design. Pre-wired for auto operation as well as manual override. Dura Port discharge fittings in 3/4''. Made in USA.

Johnson Pump 500 GPH Auto Bilge Pump 3/4 Hose 12V Dura Port

BILGE PUMP SMALL 12V

Rule 20F 800 Series submersible bilge pump with an output of up to 50 litres per minute (13 gallons). The Rule submersible bilge pump is a light weight, compact pump with a tough plastic body and integral strainer. The quick release strainer allows for rapid cleaning of the submersible bilge pump internal components. The Rule 800 range of small submersible bilge pumps are recommended for discharge heads up to a maximum of 2 metres.

Rule 20F Bilge Pump - 800 GPH Square

T-H Marine 800 Gph Automatic Bilge Pump - Plastic - Bilge Pump - 12V - Snap-in Base - Easy Installation in the Boat Pumps, Parts & Accessories department at

3000 GPH Bilge Pump – 12V – DC — 1.25 in. – Submersible Boat & Marine Pump –

Rule-mate 2000 gph 12 volt fully automated bilge pumpthe rule-mate 2000 gph pump consists of a powerful rule bilge pump and a highly intelligent circuit board in a single housing. The pump activated when the water reaches 2-1/2in and automatically shuts off when the pump senses no water against the impeller reducing the remaining water to approximately 5/8in. Rule-mate intelligencerule-mate bilge pumps have built-in programming that can sense when the pump is running but not pumping water.

Rule -mate 2000 GPH Fully Automated Bilge Pump - 12V

Submersible Bilge Pump – 450 GPH – 12V – DC – 3/4″ –

26.5 ft Max. Head, 2 in, Electric Bilge Pump - 4P012

Features:, The SEAFLO submersible bilge pumps are tough enough for any bilge., High Flow: for use from 22-234L / Min (1.32-14.04 cubic meters /

SEAFLO 1500GPH Bilge Pump 12V

12v Bilge Pump 1100gph Automatic Boat Marine Water Pump - Temu

Rigorous engineering and testing helped generate the new series of bilge pumps. Our pumps are tested to the highest standard, achieving rated performance at 12V vs. 13.6V, resulting in higher flow with better efficiency for the toughest applications. Our new designs include: Higher Flow optimized impeller to provide greater flow at the same amperage. Built-in Thermal Cut-Off (TCO) provides added protection for pump and vessel.

Rule 27DA 1100GPH Standard Bilge Pump - 12V

A Dry Bilge is a clean odorless bilge. Rule now offers the best most effective method of removing almost all of the water in your bilge leaving 1/8 or less keeping your bilge fresh clean and dry. Features. Drains the bilge almost dry. Filter-free design. Self-priming to 9.5' (3 m). Able to run dry without damaging the pump. Up to 4.0 GPM (15 LPM) flow. Back flow prevention. Connections for 3/4 (19 mm) hose barbs. Rotating pump head and ports. Compact and simple design.