STL file BMW E90 CUP HOLDER cupholder 🍹・3D print design to download・Cults

Adaptive cup holder for bmw e90 e91 e92 e93 I found many diffrent cup holders for this car, but none was one for all drink sizes. After lot of testing, this is what i came up with. Some drinks still not fit well (especially 0,5l cans because of e90 center trim). If your driving style is very agressive, or feel like your small cans are wiggly i also made a small ring insert which is press fit, to hold small cans very tightly. This cup holder only needs 2 common rubber springs, you can basically use any size you have (depends on how tight you want it). Assembly is pretty straight forward. Insert 6 sticks into position (they clip in place, depends on your printer it might be tight fit, just push them in carefully to not break it), then hook then hook rubber spring on all 3 of them. If the clips dont fit into place (your printer might not be well calibrated) you can lightly sand the clips so you have less tight fit Assembly in the car: Depending of the space you have, you might need to cut or sand the plastic connector holder, this holder is completely useless and you dont have to be afraid to cut it. Then just screw it with original screws. Easy, job done. Note: If you purchase this file, you have rights to only use it for personal use. Note 2: If you want to commercially sell it, you can contact me via email: tadeas.kahuda1@gmail.com with your offer, or we can discuss a price.

Wanted a cup holder that more closely matched the interior of the e30, looked as stock as possible, required little to no modification of the interior