Motenergy ME1114 Brushless DC Permanent Magnet Motor - 72V

Motenergy ME1114 Brushless DC Permanent Magnet Motor - 72V
This three-phase motor requires a motor controller (Sevcon Gen4 or Kelly controllers) that we currently do not offer. Output Power of 10 KW Continuous, 24 KW Peak (at 72 volts) Designed for long life. No brush maintenance. The motor is 92% efficient at voltages between 24 to 72 VDC. Continuous current of 125 amps AC (180 Amps DC into the motor control). This is a 3-phase, Y-connected Permanent Magnet Synchronous Motor with an axial air gap and a Sine/Cosine Speed Sensor. It has two stators with a rotor in the center. This is a 4 pole motor (8 magnets). The Phase to Phase winding resistance is 0.05 Ohms. The maximum recommended rotor speed is 5000 RPM. Voltages from 0 to 72 VDC input to the control. Torque constant of 0.12 Nm per Amp The Inductance Phase to Phase is 0.05 Milli-Henry Armature Inertia is 45 Kg Cm Squared. Continuous current of 125 Amps AC (180 Amps DC into the motor control). Peak current of 420 Amps AC for 1 minute (600 Amps DC into the motor control). Weight of 35 pounds. Peak Stall Torque if 48 ft lb. This is an Open Frame, Fan Cooled motor that includes a temperature sensor. Neutral-Timed.