PB44Z Post Base 4x4

FOR 4X4 INSTALLATION/ZMAX GALVANIZED / NOT RECOMMENDED FOR NON-TOP SUPPORTED INSTALLATION/12 GAUGE / SET RIGHT INTO CONCRETE/(12) 16d NAILS / HOT DIPPED GALVANIZED FASTENERS REQUIRED

Simpson Strong-Tie PBS 4-in x 4-in Zmax Wood To Concrete (Cast In Place) Base in the Base & Cap Hardware department at

The PB base embeds in wet concrete after pour and is made to install flush with the concrete surface. This connector was designed to help resist upload forces. Holes are provided for installation with 16d commons. A 2 inch minimum side cover is required to obtain the full load. Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or carports). 12-gauge galvanized steel.

Simpson PB44Z Strong-Tie 4 x 4 Post Base, Z-Max Finish

Simpson Strong-Tie 4 In. x 4 In. 12 ga Z-Max PB Post Base - Brownsboro Hardware & Paint

Simpson Strong-Tie BC40Z 4x Post Half Base - ZMAX Finish

Post and column bases secure the bottom of posts or columns to concrete and are perfect for decks or patio covers. Models are available for attaching to existing hardened concrete, wet concrete, as well as wood. The AB series also offers adjustability around the anchor bolt to achieve optimum post placement. Many models provide a 1 in. standoff from the concrete to help avoid post-end rot from moisture.