Abonnieren

Anmelden

Power over Ethernet (PoE) Injector 1 Port, 48 V DC, IEEE 802.3af

Power over Ethernet (PoE) Injector 1 Port, 48 V DC, IEEE 802.3af

Key Specifications, ,Transtector's PI-1C6-ATB-LPOD-4870 outdoor Single-port Gigabit Category 6 (Cat 6) Midspan/Injector is a commercial grade

Power Over Ethernet PoE Midspan Injector Category 6 1 Port 802.3at Type B Outdoor w/ Lightning Protection & Power Supply 48 Volts 48 Watts

Tycon Systems 36-72VDC in 56V 35W 802.3at PoE Out DC to DC Converter and Gigabit 802.3at PoE Injector TP-DCDC-4848GD-HP

Tycon Power Systems TP-POE-48GD 48V 24W Gigabit 802.3af POE

4-Port Multi-Gigabit PoE+/PoE++ Injector - Ethernet Extenders

Provides remote power to equipment through CAT5/5e/6 Ethernet cable up to 100M IEEE802.3af Power over Ethernet with DC 48V 0.35A Power Supply, US plug

48V PoE Injector Adapter Power Supply, 10/100Mbps IEEE 802.3af Compliant for Most Cisco Polycom Aastra Ubiquiti Unifi IP Cameras, IP Phones, 2 Pack

U5159 UCTRONICS IEEE 802.3af Micro USB Active PoE Splitter Power

48V 24V 24W Gigabit PoE Injector 1000Mbps 802.3af Wall Plug Power

The Active Vision AIP-POE4801-SW1 Single Port PoE Injector is used to transmit data and power to any supported Internet Protocol device with one

AIP-POE4801-SW1, PoE Injector, Single Port Power Over Ethernet, 802.3af, 48V 15.4W

The Intellinet Network Solutions Power over Ethernet injector allows you to connect your IEEE 802.3af-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af powered device (PD) to a switch.

Intellinet 524179 1-Port PoE Injector

POE InjectoR Power Over Ethernet: 48V 24W 0.5A POE Adapter. Just plug the network cable(not included) into your network switch and into the LAN

POE Injector 48V 30W PowerOver Ethernet Adapter For IP Phone Camera IEEE 802.3af

The TP-POE-2456GD is a unique Power over Ethernet adapter which converts a 24VDC passive PoE input to an 802.3af/at 56VDC PoE output. The only connections required are CAT5/6 cables. The IEEE 802.3af/at compliant PoE output is capable of up to 35W power output.

Tycon Systems TP-POE-2456GD 24V Passive PoE in, 56V 35W Gigabit 802.3at PoE Output Converter

4 Port Gigabit PoE Extender (IEEE 802.3af/at/bt) PoE Injector, DIN-Ra

Industrial Gigabit Ethernet PoE injector, 60W PoE++, 802.3bt, 1