1000VA Isolation Transformer, 117VAC to 117VAC — AC-DC PowerShack

Part #: ISO-1000 Input Voltage: 117VAC Output Voltage: 117VAC ISOLATED Max Power Rating: 1000VA 10 Amp fuse protection: 5mm x 20mm (fast blow) Part #: GMA-10A-5 Dimensions: 9.5”(L) x 6.8”(W) x 6”(H) Polarized 2-prong output power cord. No grounding wire connected inside

Part #: ISO-1000

Input Voltage: 117VAC
Output Voltage: 117VAC ISOLATED
Max Power Rating: 1000VA
10 Amp fuse protection: 5mm x 20mm (fast blow) Part #: GMA-10A-5
Dimensions: 9.5”(L) x 6.8”(W) x 6”(H)
Polarized 2-prong output power cord. No grounding wire connected inside

PHC ISO-500 500 Watts AC Isolation Transformer

1000VA,/Watts AC Isolation Transformer with Pass-Through Grounding

PHC ISO-300 3 Amp Isolation Transformer

AC-DC AC-AC Power supply adapters, Variable and Isolation Transformer — AC-DC PowerShack

Part #: RSP-524T, Input Voltage: 90~120VAC, Output Voltage: 24VDC, Output Current: 5A **Discontinued** Can considered the 14 amp version: RSP-1424T

24V DC @ 5A DC Regulated Switching Power Supply

AC-DC Switching Regulated Power Supply 12V DC @ 4160mA; DIN-5

AC-DC AC-AC Power supply adapters, Variable and Isolation Transformer — AC-DC PowerShack

Part #: SC-2T * Input Voltage: 117VAC @ 50/60Hz * Output Voltage: 0~37VAC only * Power Rating: 200VA * With Isolation, 2-pin polarized AC power cord,

Variable Transformer 2 Amp (200 Watts); 0~37VAC Output w/ISOLATION

Jameco Valuepro 112512.-R Power Transformer, 24 VAC 2 Amp 117 VAC Wire Leads: Electronic Power Transformers: : Industrial & Scientific

AC-DC Switching Regulated Power Supply 5.2VDC @ 1000mA; 1.7 x 4.0mm (+ — AC-DC PowerShack

Provides isolation from AC line when servicing hot chassis, it has a 1.5m long AC cord & the output jack is grounded. Unit is fused with a spare. It has an LED light indicator for On/Off. 120VAC in, 1000VA capable with one output. The unit has a wire wound primary and secondary with equal turns ratio. It also has a DC circuit breaker. If the unit is overloaded, remove the load, reset the breaker, wait for 5 mins then resume under normal load.